arconheader_01. arconheader_03 arconheader_04 arconheader_05
header_1 header_2 header_3 header_4 header_5
 workhose

WorkHorse Series 1

Product information is published by Applied Energy Solutions.

The Workhorse Series 1 charger fills a need for electric forklift charging with single phase AC power. The Workhorse 1 is suitable for moderate use applications where there is time for a 16 hour recharge. These are typically light duty, small business applications where there is no 3–phase power avaliable.
AES describes this charger as a "Rugged, single–shift capacity charger where consistency, reliability and efficiency are key factors without the pressure of recharge time."
The Workhorse Series 1 chargers are fully automatic, and come with the manufacturer’s 2–year parts and labor warranty.

Ship up to 5 Workhorse 1 chargers to one location anywhere in the continental U.S. for just $75.00, Ship 6 to one location in continental U.S. and get free shipping.
For pricing and to order, please Contact Us

Features& Benefits

chart diagram
  • Fully integrated microprocessor control for automatic volt/time termination
  • Selectable refresh charge for 30 minutes every 24 hours
  • Ten to sixteen hours charge time.
  • Auto start with five second delay
  • Selectable one hour time delay
  • Memory retention during AC power loss
  • Automatic shutdown for the following conditions
    • 80% charge does not occur in twelve hours
    • Volts per cell are too high or too low
    • Charging current is too low
    • Battery cable is disconnected while charging CAUTION: DISCONNECTING THE BATTERY FROM THE CHARGER DURING THE CHARGE CYCLE WITHOUT MANUALLY STOPPING THE CHARGER CAN CAUSE DAMAGE TO BOTH OPERATORS AND EQUIPMENT AND VOID THE WARRANTY
  • Ferroresonant tapered charge for optimum battery and charger life
  • Selectable 80% voltage of 2.37 or 2.45 volts per cell
  • Digital display for showing;
    • Charge current
    • Fault codes
  • Multi color LED’s indicating charging status, equalization mode and fault shutdown
  • Red push button for manual shutdown
  • Manual jump start for over–discharged batteries
  • Manual equalize button
  • Supplied with seven foot AC line cord and plug (line cord not provided on 12A750, 18A450, 18A600, 18A750, 24A600 @120V AC)
  • Ten foot long output cables for added
  • flexibility
  • Numerous Output connectors available as standard

Product Safety

  • UL Listed
  • UL Listed to Canadian Safety Standards

Optional Features

  • Wall Mount brackets available